Cosmic Epoxy

Home / ShopStores & workshops / Walls and refinishing

Non-sag wall resin
Product renders. Real pours vary, and yours will be your own.

Walls and refinishing

Non-sag wall resin

Kit · SKU CE-WNS

Thixotropic epoxy that stays put on vertical surfaces: showers, backsplashes, feature walls. Same tints and powders.

$129.09
In stock · ships 1 to 2 business days after payment
Kit

Ground shipping to the lower 48, estimated in the cart from weight. If the real cost is lower, the difference is refunded; if higher, we ask first. Shipping · Returns · Warranty

Coverage

Sized per wall: send the dimensions.

Coverage depends on trowel thickness. Send the wall dimensions and we confirm the kit count with you before it ships.

Exactly what is in the box
  • Resin Part A and hardener Part B
  • Printed instructions

Sold separately:

  • Liquid base tint and metallic powders
  • Clear shield top coat
  • Notched trowel and plastic spreader
Surfaces and good to know

Works on:

  • Tile, drywall primed with epoxy primer, cement board

Good to know:

  • Room at 70 to 75°F
  • Not a waterproofing membrane on its own
How to apply
  1. Sand and clean, tape off.
  2. Mix, trowel on, pull the pattern with a spreader.
  3. Top coat after 24 hours in a shower.

Full printed instructions ship in the box.

Working, recoat and cure times
Working timeAbout 30 minutes
Recoat windowWithin 24 hours
Full cure7 days

At 70 to 75°F. Colder rooms slow every one of these. All five clocks, defined.

Safety and technical documents

Resin and hardener are skin and eye irritants before they cure. Nitrile gloves, eye protection, ventilation. Follow the label and the safety data sheet, not the smell.

Safety data sheet: request by email
Technical data sheet: request by email

Returns and warranty

Unopened, undamaged product returns within 30 days of delivery. Opened resin cannot be returned. Defective material is replaced. Returns · Warranty

Goes with it