Flex floor kit

300 to 600 sq ft per kit as a broadcast coat.

One gallon covers 75 to 150 sq ft when broadcasting sand or flake into it. Plan 1.5 five-gallon buckets of sand, or 3 to 4 flake bags, per gallon for a full broadcast.

• 2 gal resin, Part A
• 2 gal hardener, Part B
• Printed instructions

Sold separately:

• Color flake blend or broadcast sand
• Clear shield top coat
• Floor tool pack

Works on:

• Bare or ground concrete
• Exterior slabs, patios, steps

Good to know:

• Broadcast system: needs flake or sand to reach the stated coverage
• Let the buckets sit at room temperature for 24 hours after delivery in cold months

1. Grind or sand, vacuum, alcohol wipe.
2. Mix 1:1 for 3 minutes, roll or squeegee to 75 to 150 sq ft per gallon.
3. Broadcast flake or sand until it stops sinking in, while the coat is wet.
4. Scrape and vacuum the excess next day, then top coat.

Full printed instructions ship in the box. The four steps.

At 70 to 75°F. Colder rooms slow every one of these. All five clocks, defined.

Unopened, undamaged product returns within 30 days of delivery. Opened resin cannot be returned. Defective material is replaced. Returns · Warranty