25 g or 400 g
Metallic color powders
25 g accents a bartop · 400 g runs a whole floor
In stockFrom $1.74
ChooseHome / ShopStores & workshops / Casting
Product renders. Real pours vary, and yours will be your own.
Casting
Deep pour resin
1.5 gal kit · 192 oz mixed · SKU CE-DPR-1.5G
Water-clear casting resin that pours up to 3 inches in one go with no haze. River tables, resin bars, encapsulated anything.
$149.99
In stock · ships 1 to 2 business days after payment
1.5 gal kit · 192 oz mixed
Ground shipping to the lower 48, estimated in the cart from weight. If the real cost is lower, the difference is refunded; if higher, we ask first. Shipping · Returns · Warranty
How many kits
Coverage
About 346 cubic inches per kit.
192 oz of mixed resin is about 346 cubic inches: a 4 ft river, 4 in wide, 1.5 in deep, with a little left over. Use the volume calculator on this page.
Exactly what is in the box
- Resin Part A and hardener Part B, 1.5 gal total
- Printed instructions
Sold separately:
- Liquid tints and metallic powders
- Mold release and tape
Surfaces and good to know
Works on:
- Sealed wood, silicone or HDPE molds
Good to know:
- Pour up to 3 in per layer; 2 in recommended for a first cast
- Cures in about 48 hours; a big mass gets warm, keep the room at 70 to 75°F
How to apply
- Seal the wood, build and seal the mold.
- Mix slowly for 5 minutes, scraping the sides. Pour in one place and let it flow.
- Torch bubbles at 15 and 45 minutes. Leave it 48 hours.
Full printed instructions ship in the box.
Working, recoat and cure times
| Working time | About 60 minutes |
| Demold | 48 hours |
| Sand and finish | 5 days |
| Full cure | 7 days |
At 70 to 75°F. Colder rooms slow every one of these. All five clocks, defined.
Safety and technical documents
Resin and hardener are skin and eye irritants before they cure. Nitrile gloves, eye protection, ventilation. Follow the label and the safety data sheet, not the smell.
Safety data sheet: request by email
Technical data sheet: request by email
Goes with it
