25 g or 400 g
Metallic color powders
25 g accents a bartop · 400 g runs a whole floor
In stockFrom $1.74
ChooseHome / ShopStores & workshops / Bartop & tabletop
Product renders. Real pours vary, and yours will be your own.
Bartop & tabletop
Bartop & tabletop epoxy
2 quarts or 2 gallons · SKU CE-CBR
Cosmic Epoxy clear epoxy for bartops, tabletops and countertops. Choose the package size for your surface, then make the finish your own.
$49.89
In stock · ships 1 to 2 business days after payment
2 quarts or 2 gallons
Ground shipping to the lower 48, estimated in the cart from weight. If the real cost is lower, the difference is refunded; if higher, we ask first. Shipping · Returns · Warranty
How much resin
Coverage
10 sq ft per 2 qt · 40 sq ft per 2 gal.
About 20 sq ft per gallon in one full flood coat, roughly 80 mil or a little under 1/8 in. The thin seal coat underneath uses about a fifth of that again, so a 2 gal kit does a 30 to 40 sq ft top depending on how thick you pour. Add 15 percent for drip edges on an island.
Exactly what is in the box
- Resin Part A and hardener Part B, 1:1 by volume
- Printed instructions
Sold separately:
- Liquid base tint and metallic powders for color
- Clear shield top coat for scratch and heat resistance
Surfaces and good to know
Works on:
- Laminate, wood, tile, existing solid surface, concrete
- Any sound surface, sanded and primed with a thin seal coat
Good to know:
- Cures water-clear; add tint and powders for color
- Room at 70 to 75°F for 24 hours before and after
How to apply
- Sand to 80 grit, clean, seal coat, cure overnight.
- Mix 1:1 for 3 minutes, pour, spread to a full flood coat (about 20 sq ft per gallon), pop bubbles with a torch.
- Recoat within 24 hours if you want a second flood.
Full printed instructions ship in the box.
Working, recoat and cure times
| Working time | About 30 minutes |
| Recoat window | Within 24 hours |
| Light use | 48 hours |
| Full cure | 7 days |
At 70 to 75°F. Colder rooms slow every one of these. All five clocks, defined.
Safety and technical documents
Resin and hardener are skin and eye irritants before they cure. Nitrile gloves, eye protection, ventilation. Follow the label and the safety data sheet, not the smell.
Safety data sheet: request by email
Technical data sheet: request by email
Goes with it
